CVF Titan Intercooler (2015-2020 F-150 2.7L/3.5L/Raptor EcoBoost)
Note: The Titan will fit 21+ models with a slight modification to the lower cold side hose (included with the intercooler). Please contact email@example.com for more information.
FEATURED ON LUIS LUNAS' RECORD-BREAKING 2.7L F-150!
SEE FEEDBACK FROM THE ECOBOOST F-150 COMMUNITY HERE:
Step-by-step installation guide by Backroad Driver on YouTube
Step-by-step installation guide by Brew City Boost on YouTube
Step-by-step installation guide and product preview video by Trey Spooner on YouTube
Detailed product review by user jgree32 at FordRaptorForum.com
Detailed product review by user Rusty Shackleford at F150EcoBoost.net
Detailed product review by user chimmike at F150Forum.com
Direct bolt-on replacement - no vehicle modification required
40+ degree reduction in Charge Air Temperature (CAC) observed in real-world conditions
Over 50% greater core volume than OEM intercooler (20.5" x 9" x 4.5")
High-flow cast end tanks ensure considerably better airflow efficiency than welded aluminum
TIG-welded bar-and-plate construction
CVF Lifetime Warranty
LESS HEAT, MORE POWER
Improve the performance of your EcoBoost F-150 by replacing the small, inefficient stock intercooler to reduce heat and produce more power. This intercooler is a direct fit replacement that features a core over 50% larger than the stock unit.
As the charts show in the images above, the CVF Titan Intercooler saw Charge Air Temperature (CAC) rise only +2 degrees over ambient temperature compared to the OEM intercooler's +42 CAC rise during a 2-5 gear pull under similar conditions (the OEM test was even conducted at cooler temperatures to start!).
The Titan realized a whopping 40 degree improvement over the OEM intercooler in real-world street testing by an unbiased, third-party tester where it matters: on the street, and not at the dyno (note: runs were made 1.5 hours apart on the same day).
EXCEPTIONAL CONSTRUCTION FOR MAXIMUM EFFICIENCY
Manufactured from top-grade aluminum, the CVF Titan Intercooler features a TIG-welded bar-and-plate design for maximum durability and fully cast end tanks to ensure maximum flow of air into the unit and out to your turbo - equaling more HP.
APPLICATION AND INSTALLATION
This intercooler is specifically designed to fit both the 2015-2020 EcoBoost F-150 2.7L, 3.5L, and Raptor models. There is no modification required to install the intercooler.
- JMJohan M.Verified BuyerI recommend this productRated 5 out of 5 stars3 hours agoA must for Raptors....
The factory intercooler is way too small for this application, specially if you tow anything in warmer climates.
I noticed a difference right away down here in sunny and warm florida.
Product looks great and is very well made.
I was skeptical about the install as I was doing it myself but it was easier than I expected and very straight forward, I do suggest to use a jack stand or a jack to hold it up in place while you attach everything back as it is a little heavy, especially if you are doing it by yourself.
Overall very pleased with install, fit and finish, thank you for a great product at a reasonable price.
- WWalterVerified BuyerI recommend this productRated 5 out of 5 stars2 weeks agoGreat buy
The CVF titan , straight outta the box looks awesome. Is definitely a lot thicker than stock and keeps your air intake temps down below ambient temp. While boosting I notice very slight, couple degree change just as the description says. I went with the stencil and black paint to show off the product!
- ABadrian b.I recommend this productRated 5 out of 5 stars3 months agoWorth every penny
Just installed. You can tell the major difference is in normal driving. The heat soak you get with factory Intercooler is almost non-existent. The temp drops very rapid and stays a couple of degrees above ambient when boosting.
- KKirtI recommend this productRated 5 out of 5 stars5 months agoMore then expected
Wanting more power and going to install a tune soon this is my second 3.5 F150 I'm installing upgrades on. Had I known that the intercooler upgrade would have increased throttle response and yes better fuel mileage, this would have been my first upgrade.
- TSTodd S.I recommend this productRated 5 out of 5 stars7 months agoWell worth the investment
Great quality product! Shipping and customer service was exceptional, which in this day and age you just don't see anymore! Took the truck on a couple of shake down runs last night and the temps were stabilized and down from stock as advertised.